The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Le Mans Fuel and Carburettors

Sort by Title

Sort by Price

Page 2 of 12

1 2 3 4 5 6 7 8 9 10 11 12

Polished Short Alloy Bellmouth Intake PHF

ACA12001 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 1100 (carb), Cali 3 (PHF model), Spada 3, Strada 1000

Dimensions:
46mm ID, 45mm long

Short alloy bellmouth / trumpet intake with domed mesh for Dellorto PHF 30 and 36 carbs, screws to rear of carb replacing air filter

This part is available by special order, request a quote

£46.00

INC VAT

£38.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30612 Fits Le Mans 1, Le Mans 2, Spada 3, Strada 1000, Cali 3 Classic, Cali 1100 Carb

Dimensions:
Accepts a 44mm OD carb

Plastic inlet manifold, replaces unavailable aluminium manifold. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. PHF36 carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts

This part is available by special order, request a quote

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Kit Plastic

FUA30613 Fits Le Mans 1000, 1000S

Dimensions:
46mm ID where carb enters manifold

Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHM 40 carb conversions on models previously fitted with smaller carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts

This part is available by special order, request a quote

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Petrol Tap Original Type

TAA14400 Fits V7 Sport, Le Mans 1, 750S, S3

Dimensions:
M16 x 1 threaded section, 8mm fuel pipe spigot

Manual square bodied fuel tap with nut, washer and filter. Fits left or right hand side of tank.

Off, on and reserve positions. Approved for use with fuel containing ethanol.

part in stock 2 in stock

14105400-z 14105400 GU14105400 14 10 54 00
1410 5400 1410.5400 14.10.54.00

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Original Plastic Bellmouth Intake PHF

FUA12001 Fits Le Mans 1, Le Mans 2

Dimensions:
46mm ID

Original Le Mans type bellmouth / trumpet intake with domed mesh for Dellorto PHF 30 and 36 carbs, screws to rear of carb replacing air filter.

Perfect for a 'better than new' Le Mans 1 or 2 restoration. Black finish

This part is available by special order, request a quote

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Rubber Late PHM 40

FUA28361 Fits 850/1000 ALL Models, 1100 Sport Carb

Dimensions:
45mm ID x 38mm length

Special Inlet rubber with HT lead guide for late Dellorto PHM carbs with a inlet stub OD of 46mm

Use clip SSA45970
This part will only fit late PHM40 carbs with 46mm inlet stubs, we recommend measuring your carbs before ordering

part in stock 2 in stock

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Diaphragm Accelerator Pump

FUA14050 Fits 1100 Sport Carb, Cali 3, Cali 1100 Carb, Le Mans 3, Le Mans 1000, Mille GT, Spada 3, T5, Le Mans 1, Le Mans 2, Nuovo Falcone

Dellorto accelerator pump diaphragm for PHF and PHM carbs

Also known as Guzzi ref 075527555

part in stock 2 in stock

14931050 GU14931050 14 93 10 50
1493 1050 1493.1050 14.93.10.50

£29.00

INC VAT

£24.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Needle Valve Kit

FUA14150 Fits Le Mans 1, Le Mans 2, Le Mans 3, 1100 Sport Carb, Le Mans 1000, 1000S, Spada 3

Dellorto needle valve kit comprising of valve and felt washer. For PHF36 and PHM40 carbs

Also known as Guzzi ref. 076527649, 14939150 and Ducati ref. 076527645, 0765.27.645

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14939150 GU14939150 14 93 91 50
1493 9150 1493.9150 14.93.91.50

Also fits Ducati 750/900 SS Koewe, Ducati 750 F1/Laguna Seca, Ducati 900 MHR, S2, Ducati 900 MHR-I, Ducati 1000 MHR-2,S2

£24.00

INC VAT

£20.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Float 8.5g

FUA14000 Fits Convert, G5, 1000S, 1000 SP, 1100 Sport Carb, Cali 2, Cali 3, Cali 1100, Spada 3, T3, T3 Cali, T5, V7 Sport, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT

Dimensions:
62mm x 27mm x 44mm

Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14933000 GU14933000 14 93 30 00
1493 3000 1493.3000 14.93.30.00

£22.50

INC VAT

£18.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Pod Air Filter RamAir

SIA00166 Fits Le Mans 1, Le Mans 2, Le Mans 3, Cali 1100 (Carb), Cali 3, 1000S (PHF36 Carb), Spada 3, Strada 1000, Cali 3, Mille GT (PHF 30), T5 (PHF 30)

Dimensions:
91mm high filter, 48mm ID for carb mounting

Pod type air filter for increased air flow

Made from a high performance twin layer foam this K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable (use hot soapy water). Best run dry for road. Fits PHF 30 and PHF 36 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

This part is available by special order, request a quote

£22.50

INC VAT

£18.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 12

1 2 3 4 5 6 7 8 9 10 11 12